Filter By:
- Bar Ends (10)
- BMX (38)
- Bottom Brackets (164)
- Brakes/Levers/Pads (478)
- Cables (125)
- Cassettes/Freewheels (118)
- Chainrings (218)
- Chains (101)
- Show More Categories
- Cranksets (232)
- Derailleurs (157)
- Forks (145)
- Groups (21)
- Handlebar Grips/Tape (216)
- Handlebars (173)
- Headsets (124)
- Pedals (212)
- Saddles (181)
- Seatposts (72)
- Shift/Brake Combinations (69)
- Shifters (124)
- Shocks (24)
- Stems (102)
- Other (1389)
- Show Fewer Categories
- Show More Brands
- Show Fewer Brands
- Show More Sizes
- Show Fewer Sizes
- Show More Model Years
- Show Fewer Model Years
Parts
$5.00
The Enduro contact silicone seal is the same new universal face seal that comes with Enduro TorqTite Solid-Lube bottom brackets for SRAM DUB cranksets
- Contact face seal seals directly to the bearing OD to make it a more universal fit
- Apply a thin film of grease on the back side of the seal for optimum seal performance
$5.00
RockShox 35mm Seal Kit
$5.00
Hose Kits, Barbs and Strain Relief for Servicing Reverb Lines.
$5.00
Internal components for servicing the Reverb and Reverb Stealth mechanism.
$5.00
Internal components for servicing the Reverb and Reverb Stealth mechanism.
$5.00
- Parts listed are for servicing and overhauling a single master cylinder/lever assembly
$5.00 - $17.00
Power links provide tool free chain assembly.
- Chain Compatibility: SRAM
- Reusable: No
$5.00
- 3-spline steel cogs for use with Sturmey 3-speed (and 5-speed) internal gear rear hubs
- Flat or dished for tuning chainline. Xylan coating for greater durability
$5.00
CAMO Chainring Bolt Kit are designed specifically for use with CAMO spiders and rings
- Includes 5 Torx head M5 x 8mm bolts
- ED coated steel is durable
- Bolts include a blue Nylok patch for a secure installation
- Torque bolts only to 4-5 Nm and use blue Loctite threadlock
$5.00
CAMO Chainring Bolt Kit are designed specifically for use with CAMO spiders and rings
- Includes 5 Torx head M5 x 8mm bolts
- ED coated steel is durable
- Bolts include a blue Nylok patch for a secure installation
- Torque bolts only to 4-5 Nm and use blue Loctite threadlock
$5.00
CAMO Chainring Bolt Kit are designed specifically for use with CAMO spiders and rings
- Includes 5 Torx head M5 x 8mm bolts
- ED coated steel is durable
- Bolts include a blue Nylok patch for a secure installation
- Torque bolts only to 4-5 Nm and use blue Loctite threadlock
$5.15 - $6.50
The Problem Solvers Brake Boss Plugs are perfect for when you've removed your cantilever or linear-pull brakes in order to run disc brakes or a fixie setup. These plugs thread into the empty frame bosses and lend a clean look, while also protecting the threads inside the frame from corrosion.
$5.25 - $8.19
Parts for the service of the seal and restore the smooth cycling of KS dropper posts.
$5.25
Parts for the service of the seal and restore the smooth cycling of KS dropper posts.
$5.49 - $11.99
Jagwire's Sport Slick Stainless Shift Cable is a high-quality shift cable made of stainless steel for excellent shifting performance, corrosion resistance and durability. It also comes in lengths to fit single and tandem bicycles.
$5.49 - $7.15
The Problem Solvers Cantilever Studs screw into the bosses built into bicycle frames to provide the proper mounting studs for brakes. Each brake requires two studs.
$5.50
- Missing links to make chain installation, maintenance and reparation easier
- Card of 2
$5.78
Parts for the service of the seal and restore the smooth cycling of KS dropper posts.
$5.99
Compression ring fits above the upper bearing in a Cane Creek headset to ensure vertical and horizontal compression is optimal.
- Compatible with 41mm and 42mm OD upper bearings
$5.99
Basics brake cable and housing set provide replacement level quality in an easy-to-use double ended package.
- Non-extruded galvanized inner cable
- Compatible with Mountain and Road for Shimano/SRAM
- Lead-free PVC housing
- Enough cable and housing for one brake
- Black
$5.99
Basics shift cable and housing set provide replacement level quality in an easy-to-use double ended package.
- Non-extruded galvanized inner cable
- Lead-free PVC housing
- Double ended for SRAM/Shimano and Huret/Simplex
- Disc style Huret/Simplex end is slightly smaller than original spec, but is functionally compatible with Suntour X-Press shifters
- Color: Black
- Diameter: 1.2mm
- End Type: Shimano/SRAM
- Housing Diameter: 5mm
$5.99 - $14.99
Sport level brake cables come in a variety of cable end setups to fit most bikes at a quality level well above normal OEM cables.
- Slick cables are die-extruded for smooth operation
- Pre-stretched
- SRAM/Shimano mountain compatible cable end
- Stainless steel construction resists corrosion
- Single end cable features weld-cut for easy installation
$5.99 - $14.99
Jagwire's Road Brake Inner Wire is a high-quality brake cable made of stainless steel for excellent braking performance, corrosion resistance and durability. It comes in Campagnolo and SRAM/Shimano models and lengths to fit single and tandem bicycles.